Joe Bell Joe Bell's Profile Page

Joe Bell Joe Bell

0 Course Enrolled • 0 Course Completed

Biography

Useful Latest CEM Exam Duration - Efficient Source of CEM Exam

Time is nothing; timing is everything. Stop hesitating. CEM VCE dumps help you save time to clear exam. If you choose valid exam files, you will pass exams one-shot; you will obtain certification in the shortest time with our AEE VCE dumps. If you complete for a senior position just right now, you will have absolutely advantage over others. Now, don't wasting time again, just start from our CEM VCE Dumps. Excellent & valid VCE dumps will make you achieve your dream and go to the peak of your life ahead of other peers.

These CEM mock tests are made for customers to note their mistakes and avoid them in the next try to pass Certified Energy Manager (CEM) (CEM) exam in a single try. These AEE CEM mock tests will give you real CEM exam experience. This feature will boost your confidence when taking the AEE CEM Certification Exam. The 24/7 support system has been made for you so you don't feel difficulty while using the product. In addition, we offer free demos and up to 1 year of free AEE Dumps updates. Buy It Now!

>> Latest CEM Exam Duration <<

Free PDF AEE - CEM - Efficient Latest Certified Energy Manager (CEM) Exam Duration

Taking these mock exams is important because it tells you where you stand. People who are confident about their knowledge and expertise can take these CEM practice tests and check their scores to know where they lack. This is good practice to be a pro and clear your Certified Energy Manager (CEM) (CEM) exam with amazing scores. Exams-boost practice tests simulate the real CEM exam questions environment.

AEE Certified Energy Manager (CEM) Sample Questions (Q23-Q28):

NEW QUESTION # 23
Which of the following is NOT a renewable-energy resource?
SELECT THE CORRECT ANSWER

A. Crop residue
B. Geothermal heat
C. Saw grass
D. Ocean waves
E. Shale gas

Answer: E

Explanation:
Renewable energy resources are naturally replenished on a human timescale. Let's evaluate each option:
A:Saw grass:A biomass resource, renewable through regrowth.
B:Shale gas:A fossil fuel extracted from shale formations, non-renewable.
C:Geothermal heat:Energy from Earth's internal heat, renewable.
D:Ocean waves:Mechanical energy from ocean surface waves, renewable.
E:Crop residue:Organic materials from agriculture, renewable.
Conclusion:
Shale gas is not a renewable energy resource. Therefore, the correct answer is B.

NEW QUESTION # 24
You are using a performance contract to finance the added cost of using more-efficient equipment in the construction of a new building. Which of the following International Performance Measurement and Verification Protocol (IPMVP) options would you use to verify annual energy savings?

A. Option E - Stipulated savings
B. Option D - Calibrated simulation
C. Option A - Retrofit isolation: key parameter measurement
D. Option B - Retrofit isolation: all parameter measurement
E. Option C - Whole facility measurement

Answer: E

NEW QUESTION # 25
An air-conditioning system at full load is rated at 70-kW (thermal cooling) and has a coefficient of performance (COP) of 4.1. What is the electrical load at full load?

A. 35.0 kW
B. 46.7 kW
C. 17.1 kW
D. 70.0 kW
E. 23.3 kW

Answer: E

NEW QUESTION # 26
Which of the advantages listed below, makes an ice TES system more preferred over a water TES system, when a load shifting strategy is considered?

A. Ice-storage systems operate with a higher coefficient of performance (COP)
B. Ice-storage systems require lower maintenance due to lower pumping volume
C. Water-storage systems require smaller storage tanks since water has a higher density than ice
D. Ice-storage systems require smaller storage tanks since ice has a higher energy storage density

Answer: D

Explanation:
To determine which advantage makes an ice Thermal Energy Storage (TES) system more preferred over a water TES system for a load shifting strategy, we need to evaluate each option based on the principles of thermal energy storage as outlined in the Association of Energy Engineers (AEE) Certified EnergyManager (CEM) training materials. Load shifting involves storing energy (cooling capacity) during off-peak periods and releasing it during peak demand, making storage efficiency and capacity critical. Let's analyze each option step-by-step.
Step 1: Understand Ice TES vs. Water TES in Load Shifting
* Ice TES: Uses the latent heat of fusion of water (ice melting) to store cooling energy. Ice is formed during off-peak hours (e.g., overnight) and melted during peak hours to provide cooling.
* Water TES: Uses the sensible heat capacity of water, storing chilled water (typically 4-6°C) to provide cooling.
* Load Shifting Goal: Maximize cooling storage in minimal space and cost, shifting electrical demand from peak to off-peak periods.
* CEM Reference: CEM materials in the "Thermal Energy Storage" section highlight ice TES for its high energy density and compact storage, contrasted with water TES for simpler operation but larger volume requirements.
Step 2: Evaluate Each Option
Option A: Ice-storage systems operate with a higher coefficient of performance (COP)
* Analysis:
* COP Definition: COP = (Cooling Output) / (Energy Input). For TES, this relates to the chiller's efficiency.
* Ice TES: Requires chillers to operate at lower temperatures (e.g., -5°C to 0°C) to freeze water, which typically reduces chiller COP (e.g., 3-4) compared to water TES chillers operating at 4-6° C (COP ~5-6).
* Reality: Ice TES systems often have a lower COP due to the additional energy needed for phase change, though total system efficiency may improve with load shifting benefits.
* CEM Reference: CEM notes that ice TES energy input is higher per unit of cooling due to lower evaporating temperatures, contradicting a "higher COP" claim.
* Conclusion: This statement is incorrect and not an advantage for ice TES in load shifting.
Option B: Ice-storage systems require smaller storage tanks since ice has a higher energy storage density
* Analysis:
* Energy Storage Density:
* Ice TES: Relies on latent heat of fusion = 334 kJ/kg (80 kcal/kg or ~144 Btu/lb). This is the energy absorbed/released when water freezes/melts, far exceeding sensible heat.
* Water TES: Relies on sensible heat = cp##T c_p cdot Delta T cp##T, where cp=4.18 kJ
/kgcdotp°C c_p = 4.18 , ext{kJ/kg °C} cp=4.18kJ/kgcdotp°C (1 Btu/lb °F). For a typical #T=10°CDelta T = 10°C#T=10°C (e.g., 4°C to 14°C), energy stored = 4.18×10=41.
8 kJ/kg 4.18 imes 10 = 41.8 , ext{kJ/kg} 4.18×10=41.8kJ/kg (~20 Btu/lb).
* Comparison: Ice stores ~8 times more energy per kg than water for a 10°C range (334 vs.
41.8 kJ/kg).
* Volume Impact: Ice's density (~917 kg/m³) is slightly less than water (~1000 kg/m³), but the latent heat advantage dominates, reducing required tank volume significantly.
* Load Shifting: Smaller tanks mean less space and potentially lower capital costs, a key advantage for peak load management.
* CEM Reference: CEM training emphasizes ice TES's high energy density as a primary reason for its preference in space-constrained load shifting applications.
* Conclusion: This statement is correct and a clear advantage for ice TES.
Option C: Water-storage systems require smaller storage tanks since water has a higher density than ice
* Analysis:
* Density: Water = 1000 kg/m³; Ice = 917 kg/m³. Water is denser, but density alone doesn't determine storage size in TES.
* Energy Storage: As calculated, water's sensible heat capacity (e.g., 41.8 kJ/kg for 10°C) is much lower than ice's latent heat (334 kJ/kg). To store the same cooling capacity, water TES requires
~8 times more mass and thus larger tanks (even accounting for density differences).
* Implication: Water TES tanks are larger, not smaller, contradicting the statement.
* CEM Reference: CEM materials note water TES's larger volume requirements as a disadvantage compared to ice TES.
* Conclusion: This statement is incorrect and not an advantage for ice TES (it favors water TES incorrectly).
Option D: Ice-storage systems require lower maintenance due to lower pumping volume
* Analysis:
* Pumping Volume: Ice TES often uses glycol or brine solutions to transfer heat at lower temperatures, requiring pumps sized for smaller volumes due to concentrated coolingcapacity.
Water TES circulates larger volumes of chilled water. However, "lower pumping volume" doesn' t directly translate to "lower maintenance."
* Maintenance: Ice TES systems are more complex (ice-making equipment, heat exchangers), potentially increasing maintenance (e.g., defrost cycles, corrosion from brine). Water TES is simpler, often with lower maintenance needs.
* CEM Reference: CEM discusses ice TES complexity as a trade-off for its density advantage, not a maintenance benefit.
* Conclusion: This statement is questionable and not a primary advantage for load shifting.
Step 3: Identify the Key Advantage for Load Shifting
* Load Shifting Context: The goal is to store maximum cooling capacity efficiently during off-peak hours. Option B (smaller tanks due to higher energy storage density) directly supports this by reducing space and installation costs, a critical factor in TES design per CEM guidelines.
* Elimination:
* A: Incorrect (lower COP, not higher).
* C: Incorrect (water TES tanks are larger).
* D: Weak (maintenance isn't clearly lower; not the primary driver).
* B: Correct and relevant.

NEW QUESTION # 27
An energy-saving project costs $540,000. The project will have maintenance costs of $25,000 per year. The energy savings from the project are $160,000 per year. The project has a life of 10 years with no salvage value. The minimum attractive rate of return (MARR) is 10%. Using end-of-year cash flows, calculate the net- present value (NPV) of the project.

A. $311,556
B. $289,575
C. $154,657
D. $456,254

Answer: B

Explanation:
A screenshot of a math formula AI-generated content may be incorrect.

NEW QUESTION # 28
......

Whether you are a student at school or a busy employee at the company even a busy housewife, if you want to improve or prove yourself, as long as you use our CEM guide materials, you will find how easy it is to pass the CEM Exam and it only will take you a couple of hours to obtain the certification. With our CEM study questions for 20 to 30 hours, and you will be ready to sit for your coming exam and pass it without difficulty.

CEM Original Questions: https://www.exams-boost.com/CEM-valid-materials.html

Now, our CEM dumps vce have received warm reception from many countries and have become the leader in this field, Our CEM exam engine will help you solve all the problems, AEE Latest CEM Exam Duration If you want to, then you have arrived right place now, All these three formats consist of CEM Certified Energy Manager (CEM) Actual Questions that are not only helpful for the preparation but also provide useful information about the CEM Certified Energy Manager (CEM) Valid Dumps certification preparation, On your way moving towards success, our CEM preparation materials will always serves great support.

The biggest thing to monitor is the amount of CEM total traffic allowed per month without exceeding a designated cap, It might, for example, be possible to motivate the team so Real CEM Dumps Free that some tasks do come in early, or shift the planning process to avoid this problem.

Pass Guaranteed Quiz 2025 AEE High Pass-Rate CEM: Latest Certified Energy Manager (CEM) Exam Duration

Now, our CEM Dumps Vce have received warm reception from many countries and have become the leader in this field, Our CEM exam engine will help you solve all the problems.

If you want to, then you have arrived right place now, All these three formats consist of CEM Certified Energy Manager (CEM) Actual Questions that are not only helpful for the preparation but also provide useful information about the CEM Certified Energy Manager (CEM) Valid Dumps certification preparation.

On your way moving towards success, our CEM preparation materials will always serves great support.